Evaluation of the aesthetics and clinical findings in patients with missing maxillary lateral incisors treated with a 10-year interval.

INTRODUCTION: The most common treatment approaches for patients missing maxillary lateral incisors are implant replacement (IT) and orthodontic space closure (SC). Treatment techniques change and improve over time, and it is of interest to know if improvements differ between the methods. AIM: To compare the aesthetic outcome and other clinical findings in patients with one or two missing maxillary lateral incisors who were treated with a 10-year difference in time, with either orthodontic space closure or implant replacement. MATERIAL AND METHODS: A total of 88 patients were included in the study. Forty-four patients treated between 2011 and 2018 were included as the latter cohort (LC). The LC was compared to the early cohort (EC; n = 44), treated between 2001 and 2008. A total of 132 teeth was analysed: 62 teeth in the EC (28 teeth in IT cases and 34 teeth in SC cases) and 70 teeth in the LC (34 teeth in IT cases and 36 teeth in SC cases). Long-term clinical and aesthetic outcomes were evaluated. RESULTS: An improvement over time was found in crown length, BoP, papilla, the inclination of incisors, and overall appearance in IT cases and in crown colour and overbite in SC cases. A deterioration over time was found in crown length and BoP among the SC cases. CONCLUSION: Among the IT cases, an improvement in outcomes was noted over time. When comparing SC cases the colour of the crown and overbite had improved, while crown length and BoP had deteriorated over time.

Biomechanical behavior of implant retained prostheses in the posterior maxilla using different materials: a finite element study.

BACKGROUND: The aim of this study is to evaluate the biomechanical behavior of the mesial and distal off-axial extensions of implant-retained prostheses in the posterior maxilla with different prosthetic materials using finite element analysis (FEA). METHODS: Three dimensional (3D) finite element models with three implant configurations and prosthetic designs (fixed-fixed, mesial cantilever, and distal cantilever) were designed and modelled depending upon cone beam computed tomography (CBCT) images of an intact maxilla of an anonymous patient. Implant prostheses with two materials; Monolithic zirconia (Zr) and polyetherketoneketone (PEKK) were also modeled .The 3D modeling software Mimics Innovation Suite (Mimics 14.0 / 3-matic 7.01; Materialise, Leuven, Belgium) was used. All the models were imported into the FE package Marc/Mentat (ver. 2015; MSC Software, Los Angeles, Calif). Then, individual models were subjected to separate axial loads of 300 N. Von mises stress values were computed for the prostheses, implants, and bone under axial loading. RESULTS: The highest von Mises stresses in implant (111.6 MPa) and bone (100.0 MPa) were recorded in distal cantilever model with PEKK material, while the lowest values in implant (48.9 MPa) and bone (19.6 MPa) were displayed in fixed fixed model with zirconia material. The distal cantilever model with zirconia material yielded the most elevated levels of von Mises stresses within the prosthesis (105 MPa), while the least stresses in prosthesis (35.4 MPa) were recorded in fixed fixed models with PEKK material. CONCLUSIONS: In the light of this study, the combination of fixed fixed implant prosthesis without cantilever using a rigid zirconia material exhibits better biomechanical behavior and stress distribution around bone and implants. As a prosthetic material, low elastic modulus PEKK transmitted more stress to implants and surrounding bone especially with distal cantilever.

Comparison of different maxillary advancement protocols in patients with unilateral cleft lip and palate: a finite element analysis.

OBJECTIVES: The aim of this study was to evaluate the stress distributions and possible amount of movement in the maxillofacial region resulting from different maxillary advancement protocols in patients with unilateral cleft lip and palate. MATERIALS AND METHODS: A unilateral cleft lip and palate model (CLP model) with Goslon score 4 was created for finite element analysis. Three different protocols were compared: Group 1: usage of a face mask with elastics placed at a 30? angle to the occlusal plane over a conventional acrylic plate; Group 2: usage of a face mask with elastics placed at a 30? angle to the occlusal plane over miniplates placed in the infrazygomatic crest region; Group 3: usage of elastic from the menton plate placed in the mandible to the infrazygomatic plates in the maxilla. RESULTS: Dental effects were greater in the maxillary protraction protocol with a face mask over a conventional acrylic plate (Von Misses Stress Values; Group 1?=?cleft side:0.076, non-cleft side:0.077; Group 2?=?cleft side:0.004, non-cleft side: 0.003; Group 3?=?cleft side:0.0025; non-cleft side:0.0015), whereas skeletal effects were greater in maxillary protraction protocols with face mask using skeletal anchorage (Von Misses Stress Values; Group 1:0.008; Group 2:0.02; Group 3:0.0025). The maximum amount of counterclockwise rotation of the maxilla as a result of protraction was observed in traditional acrylic plate face mask protocol, and the minimum amount was observed by using elastics between infrazygomatic plates and menton plate. CONCLUSIONS: In individuals with unilateral cleft lip and palate with Goslon score 4, it was observed that the skeletally anchored face mask caused more skeletal impact and displacement than both the traditional acrylic plate face mask model and the pure skeletally supported maxillary protraction model. CLINICAL RELEVANCE: When planning maxillary protraction treatment in patients with cleft lip and palate, it should be considered that more movement in the sagittal plane might be expected on the cleft side than the non-cleft side, and miniplate and screws on the cleft side are exposed to more stress when using infrazygomatic plates as skeletal anchorage.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

Polysacharide of Agaricus blazei gel mitigates bone necrosis in model of the jaws related to bisphosphonate via Wnt signaling.

To investigate de effect of PAb gel on the bone tissue of rats submitted to Bisphosphonate-related osteonecrosis of the jaws (BRONJ). Initially, 54 animals were submitted to BRONJ model by Zoledronic Acid (ZA) (0.1 mg/kg 3x/wk for 9 wk, ip), followed by the 1st upper left molar extraction at the 8th wk. After tooth removal, the animals were divided into 3 groups, ZA that received placebo gel or PAb gel that received 1% PAb gel, inside the dental alveolus. The control Group (CONTROL) received 0.1 mg/kg of 0.9% saline and then placebo gel. Three weeks after tooth extraction, the animals were euthanized, and maxillae were colleted for macroscopic, radiographic, histological and Raman spectomery assays. Additionally, GSK3b, beta-catenin, and Runx2 mRNA expressions were determined. Blood samples were collected for the analysis of Bone-specific alkaline phosphatase (BALP) levels. PAb gel improved mucosal healing, increased the number of viable osteocytes, while it reduced the number of empty lacunae, as well as the amount of bone sequestration. Furthermore, PAb gel positively influenced the number and functionality of osteoblasts by stimulating Wnt signaling, thereby inducing bone remodeling. Additionally, PAb gel contributed to improved bone quality, as evidenced by an increase in bone mineral content, a decrease in bone solubility, and an enhancement in the quality of collagen, particularly type I collagen. PAb gel mitigated bone necrosis by stimulating of bone remodeling through Wnt signaling and concurrently improved bone quality. PAb gel emerges as a promising pharmacological tool for aiding in BRONJ therapy or potentially preventing the development of BRONJ.

Trueness evaluation of three intraoral scanners for the recording of maximal intercuspal position.

OBJECTIVES: This clinical study aimed to assess the trueness of three intraoral scanners for the recor-ding of the maximal intercuspal position (MIP) to provide a reference for clinical practice. METHODS: Ten participants with good occlusal relationship and healthy temporomandibular joint were recruited. For the control group, facebow transferring procedures were performed, and bite registrations at the MIP were used to transfer maxillary and mandibular casts to a mechanical articulator, which were then scanned with a laboratory scanner to obtain digital cast data. For the experimental groups, three intraoral scanners (Trios 3, Carestream 3600, and Aoralscan 3) were used to obtain digital casts of the participants at the MIP following the scanning workflows endorsed by the corresponding manufacturers. Subsequently, measurement points were marked on the control group's digital casts at the central incisors, canines, and first molars, and corresponding distances between these points on the maxillary and mandibular casts were measured to calculate the sum of measured distances (DA). Distances between measurement points in the incisor (DI), canine (DC), and first molar (DM) regions were also calculated. The control group's maxillary and mandibular digital casts with the added measurement points were aligned with the experimental group's casts, and DA, DI, DC, and DM values of the aligned control casts were determined. Statistical analysis was performed on DA, DI, DC, and DM obtained from both the control and experimental groups to evaluate the trueness of the three intraoral scanners for the recording of MIP. RESULTS: In the control group, DA, DI, DC, and DM values were (39.58±6.40), (13.64±3.58), (14.91±2.85), and (11.03±1.56) mm. The Trios 3 group had values of (38.99±6.60), (13.42±3.66), (14.55±2.87), and (11.03±1.69) mm. The Carestream 3600 group showed values of (38.57±6.36), (13.56±3.68), (14.45±2.85), and (10.55±1.41) mm, while the Aoralscan 3 group had values of (38.16±5.69), (13.03±3.54), (14.23±2.59), and (10.90±1.54) mm. Analysis of variance revealed no statistically significant differences between the experimental and control groups for overall deviation DA (P=0.96), as well as local deviations DI (P=0.98), DC (P=0.96), and DM (P=0.89). CONCLUSIONS: With standardized scanning protocols, the three intraoral scanners demonstrated comparable trueness to traditional methods in recording MIP, fulfilling clinical requirements.

Site selection of micro-implant anchorages in the infrazygomatic crest in adult orthodontic patients.

OBJECTIVES: To determine the optimal placement of miniscrews, this study compared adult male and female patients in terms of cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest region. METHODS: The cone beam computed tomography imaging data of 200 patients (20-30 years old; 100 males and 100 females) were collected. The right maxillary posterior teeth in the sagittal plane were divided into six levels from proximal to distal, and three measurement sites were positioned at vertical distances of 8, 10, and 12 mm from the cementum. Cortical bone density, cortical bone thickness, and available bone width were measured in 18 measurement sites in the infrazygomatic crest and analyzed statistically. RESULTS: The highest cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest in adult male and female patients were at the level of the interradicular space between the maxillary second premolar and maxillary first molar. The bone cortical density and thickness increased with vertical height, whereas the available bone width decreased with increasing vertical height. Differences were observed in cortical bone density, cortical bone thickness, and available bone width between adult male and female patients. CONCLUSIONS: The optimal implantation sites of the micro-implant anchorages in the infrazygomatic crest were at the level of the interradicular space between the maxillary second premolar and the maxillary first molar, and the vertical height of the optimal implantation site in males was appropriately higher than that in females.

Long-term follow-up after the treatment of impacted canines in the maxilla causing severe root resorption of the lateral incisors: two case reports.

BACKGROUND: Root resorption of adjacent teeth due to impacted canines is common, and orthodontic treatment often leads to secondary resorption or even loss of adjacent roots. Clinical reports of long-term stability after treatment are rare. CASE PRESENTATION: This study reports two cases of maxillary impacted canines resulting in severe root resorption of the adjacent lateral incisors. Surgical exposure, orthodontic retraction, and alignment of the impacted canines were successful in both cases, and the resorbed lateral incisors were stable with no significant loosening and normal pulp vitality after treatment and at the 5- and 10-year follow-up appointments. CONCLUSIONS: Light orthodontic force may be used to move adjacent teeth with root resorption due to tooth obstruction. The path and direction in which the teeth are moved must be specifically designed so that the adjacent roots are not resorbed and so long-term stability can be achieved.

Innovations in Orthodontics: Skeletal Versus Dentoalveolar Expansion Utilizing Clear Aligners and TAD-Assisted Expanders.

Hypoplastic maxilla is a common skeletal anomaly that compromises function and esthetics. Beyond just a narrow-appearing smile, this abnormality presents significant restorative challenges in adult patients as it is often associated with crowding, compromised axial inclination of the teeth, lack of alveolar bone support, root proximity, and occlusal trauma.1 Recent research also confirms association of maxillary deficiency with nasal stenosis and a predisposition to compromised nasal airflow and pharyngeal collapse during sleep.2,3 Maxillary transverse skeletal deficiency is often but not always associated with posterior dental cross-bite. In most cases, maxillary posterior teeth are flared buccally and mandibular posterior teeth are excessively lingually inclined masking the underlying skeletal problem.4 Advances in 3D imaging in dentistry, namely ultra-low radiation cone-beam imaging technology, have significantly enhanced clinicians' ability to diagnose and subsequently treat a maxillary transverse deficiency.5.

Implant Placement When an Impacted Tooth and Supernumerary Teeth Are Present in the Maxilla.

The presence of impacted and/or supernumerary teeth in the maxillary anterior region can cause complications when attempting to perform restorations with implants. Extracting these structures can lead to adverse issues related to the adjacent dentition and require osseous grafting to provide a base to house the planned implant, but such an approach increases treatment time and cost. In this case report, a patient presented with an impacted permanent canine oriented on the horizontal plane with several supernumerary teeth coronal to the impacted canine. CBCT analysis revealed a very thin buccal plate over the impacted supernumerary teeth. The proposed treatment followed the principles of partial extraction therapy (PET) whereby the impacted structures were treated like bone, and implants were placed in contact with them or through them to achieve the desired osseointegration and provide long-term survival of the restored implants.

Invisalign Lite: a cross-sectional investigation of orthodontist treatment-planning practices.

OBJECTIVES: To survey treatment-planning practices of orthodontists related to the Invisalign Lite clear aligner appliance (Align Technology, San Jose, Calif). MATERIALS AND METHODS: Patients satisfying inclusion and exclusion criteria and treated with Invisalign Lite were selected from a database containing more than 17,000 patients. Relevant data regarding treatment-planning practices were obtained from Align Technology's treatment-planning facility, ClinCheck, and evaluated. RESULTS: Most (n = 135; 79.9%) patients were female and had a median (interquartile range [IQR]) age of 30.5 (23.8, 43.1) years. The median (IQR) number of aligners for the sample was 23.0 (14, 28) for the maxilla and 24 (14, 28) for the mandible. Most (n = 122; 72.2%) patients required at least one additional series of aligners. More locations for interproximal reduction (IPR) were prescribed in the mandible (mean 1.91 [1.78]) than in the maxilla (1.03 [1.78]; P < .024) in the initial accepted plan of all patients. More teeth were prescribed composite resin (CR) attachments in the maxilla (P < .0001) in the initial accepted plan of all patients. Issues regarding tooth position protocols (n = 50; 53.3%) and requirement for additional IPR (n = 68; 45.3%) were reasons for treatment plan changes before acceptance of the initial treatment plan by orthodontists. CONCLUSIONS: More than 7 of 10 patients required at least one additional series of aligners after the initial series of Invisalign Lite aligners was completed. Prescription of IPR was more common in the mandible, and prescription of CR attachments was more common in the maxilla.

Effects of eruption guidance appliance in the early treatment of Class III malocclusion.

OBJECTIVES: To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition. MATERIALS AND METHODS: The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05). RESULTS: In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group. CONCLUSIONS: The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.

Quality of life in oncologic patients after maxillectomy operations: clinical case series on different rehabilitation protocols.

OBJECTIVE: The study's purpose was to compare the quality of life (QoL) in oncologic patients treated with different rehabilitation protocols following maxillary tumor resections. PATIENTS AND METHODS: The patients were divided into three groups. Group A: 18 Patients with maxillary obturator prosthesis. Group B: 17 Patients with simultaneous autologous tissue reconstruction. Group C: 12 Patients with prosthesis on zygomatic implants. The post-operative QoL was compared using standard questionnaires, investigating items like pain, mood, social relations, and specific functions that could potentially compromise the post-operative QoL. A secondary analysis compared reconstructed vs. non-reconstructed patients. RESULTS: Most questionnaire items did not show significant differences among groups. Statistically significant outcomes were found in two parameters (social contact and sexuality), in which patients treated with zygomatic implants had the best satisfaction, and patients with obturator prostheses showed the lowest satisfaction. Patients belonging to the non-reconstructed group showed better moods than those in the reconstructed group, while taste problem complaints and pain were lower in the reconstructed group. CONCLUSIONS: Although the type of reconstruction procedure depends on the type of maxillectomy to be performed and on the general health situation of each patient, the impact of the rehabilitation protocol on the patients' QoL should be accounted for when planning the treatment.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).

Volumetric Analysis of Peri-implant Tissue Change Over Time: Validating an Innovative 3D Method.

PURPOSE: To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method-in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects-to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone. MATERIALS AND METHODS: Both methods were applied to 11 oral implant site casts (6 maxillary central incisor sites, 5 maxillary lateral incisor sites) taken from 11 patients at crown placement and at follow-up examinations 5 years later. The methods are based on digital workflows in which the reference and 5-year casts are scanned and the resulting STL files are superimposed and analyzed for three regions of interest (mesial papilla, central area, and distal papilla). The volumetric changes reported by the Lee et al method and the mean distance method were calculated and compared using the Spearman rank correlation coefficient (P < .01) and the Wilcoxon signed-rank test (P < .05). RESULTS: The correlation between the two sets of measurements was very high (Spearman rank correlation coefficient = 0.885). The new volumetric method indicated a mean volume loss of 2.82 mm3 (SD: 5.06), while the method based on the measurement of mean distance showed a mean volume loss of 2.92 mm3 (SD: 4.43; Wilcoxon signed-rank test result: P = .77). No statistically significant difference was found. The two methods gave equivalent results, and the null hypothesis was accepted. CONCLUSIONS: The new volumetric method was validated and can be considered a trustworthy tool.

Radiological features and treatment of erupting maxillary canines in relation to the occurrence of dental developmental abnormalities.

OBJECTIVE: This study aimed to investigate the radiological features of the permanent canines and the treatment carried out to ensure their eruption relative to certain features involved in Dental Anomaly Patterns (DAP). MATERIAL AND METHODS: The cross-sectional part of this retrospective register--based study focused on 1,315 dental panoramic tomographs (DPTs) of children aged 8.5-10.5 years, while the longitudinal part involved information on the treatment provided for 1,269 canines after the DPTs and on their eruption into the oral cavity. RESULTS: The canines of the DAP children more often showed evidence of early treatment (p = 0.014), with girls having more frequently interceptive treatment (p = 0.004) and boys early headgear (p = 0.022). Delayed dental age was associated with early treatment (OR 3.29, 95% CI 1.08-9.99). Either no or clear overlapping of a canine with the lateral incisor occurred more often in the DAP children, whereas canine inclination did not differ between the groups. The root development stage of the canine was more often either beginning or well advanced in the DAP children. CONCLUSIONS: The children with dental developmental abnormalities more often showed evidence of early treatment for the canines. Monitoring of the erupting canines after the first mixed stage is important to enable timely early treatment.

Evaluation of maxillary arch symmetry in cleft patients undergoing orthodontic treatment: a comparative study.

OBJECTIVE: Patients with a cleft require structured procedures to achieve feasible treatment results. Since many treatment protocols coexist without being superior to one another, this study investigated the Saarland University Hospital treatment concept for patients with unilateral and bilateral clefts to evaluate its effects upon dental arch dimensions until the early mixed dentition. MATERIAL AND METHODS: Digitized plaster models were used for data collection. Records of 83 patients (Cleft n = 41 [UCLP n = 28, BCLP n = 13], Non-Cleft Control n = 42) comprised 249 casts. The evaluation included established procedures for measurements of edentulous and dentate jaws. Statistics included Shapiro-Wilk, Friedmann, Wilcoxon and Mann-Whitney-U-Tests for the casts. The level of significance was set at p < 0.05. RESULTS: The cast analysis showed an approximation of arch dimensions towards those of age-matched patients without a cleft until early mixed dentition. The mean values of patients with and without cleft lip and palate were almost indistinguishable when compared in primary and/or early mixed dentition. CONCLUSIONS: The evaluated treatment concept leads to feasible outcomes regarding dental arches in patients with unilateral and bilateral clefts compared to an age-matched non-cleft control. CLINICAL RELEVANCE: The evaluated treatment concept leads to favorable outcomes until early mixed dentition.

Comparison of PAS and adenoids in patients with and without maxillary micrognathia before orthodontic treatment.

OBJECTIVE: Craniofacial anomalies are widely discussed as predisposing factors of breathing disorders. Since many more cofactors exist, this study investigated the association between maxillary micrognathia and morphological changes of posterior airway space and adenoids in these patients. MATERIAL AND METHODS: Cephalometric radiographs of n = 73 patients were used for data acquisition. The patients were divided into two groups according to certain skeletal characteristics: maxillary micrognathia (n = 34, 16 female, 18 male; mean age 10.55 ± 3.03 years; defined by a SNA angle < 79°) and maxillary eugnathia (n = 39, 19 female, 20 male; mean age 10.93 ± 3.26 years; defined by a SNA angle > 79°). The evaluation included established procedures for measurements of the maxilla, posterior airway space and adenoids. Statistics included Kolmogorov-Smirnov-, T- and Mann-Whitney-U-Tests for the radiographs. The level of significance was set at p < 0.05. RESULTS: The cephalometric analysis showed differences in the superior posterior face height and the depth of the posterior airway space at palatal level among the two groups. The depth of the posterior airway space at mandibular level was the same for both groups, just as the size of the area taken by adenoids in the nasopharynx. CONCLUSIONS: Skeletal anomalies affect the dimension of the posterior airway space. There were differences among the subjects with maxillary micrognathia and these with a normal maxilla. However, the maxilla was only assessed in the sagittal direction, not in the transverse. This study showed that the morphology of the maxilla relates to the posterior airway space whereas the adenoids seem not to be affected. CLINICAL RELEVANCE: Maxillary micrognathia is significantly associated with a smaller depth of the posterior airway space at the palatal level compared to patients with maxillary eugnathia.